The #1 Nexus 7 News, Discussion and Fan Site!
2012 Nexus 7 Discussion Forums (1st Generation) => Nexus 7 Connect (MicroUSB, Wi-Fi, Bluetooth, NFC, Pogo Pin) => Topic started by: RDJW on July 23, 2012, 09:12:19 PM
-
I was on hold with the nexus7 support line for 35 minutes. When I first turned it on I couldn't get past the wifi login screen because my router uses mac address filtering to connect to my wifi There didn't seem to be any way around that screen so I called support. Turns out the only solution was to disable my mac address filtering temporarily while I got thru the setup process and was able to look at the mac address on the device. I think this is a little bit short sighted as most of my deviceS have allowed me to discover mac address before setup is complete. anyway I hope this info solution helps somebody.
-
Bleeding on the cutting edge. Guess the 7 is too new, cause the online help when Googling for hints is so thin. I bought the 7 and furnished my Google account info. When the 7 arrived, my wireless router would not accept my password, due to MAC address filtering. I finally got logged in to the router's control panel, turned off the filtering, and it all then worked. But I wanted to turn the MAC filtering, and to do so I needed the 7's MAC address. I still don't know where to find it on the 7, but because I was still logged in without filtering enabled, I was able to use Cisco Network Magic to discover the MAC address of the new, unidentified item in my home wireless network. I wrote down that number, re-enabled the filtering, added the MAC address to the list of permitted addresses, saved it, and now I am happier (and connected). Two thumbs down to Google - they're as bad as Microsoft ever has been.
-
It took me a while to find it, too. And I really hated that I had to turn off the MAC filter to get to where I needed to be, ( Wifi/settings/Advanced) even if only temporarily. I'm perplexed as to why they would make it so difficult.
-
does this mean it is not easy to find? I need a command line to see ipconfig?
I too want to turn on the added security for my wireless network.
Tony
aaparkr@swbell.net
Ok, with the linksys, I was able to turn off MAC filter then look in my router for the connected devices. The Nexus was the only android device and its mac address was listed. What a pain, why can't the nexus tel me its mac address?
-
??? You can find your MAC address easily. Go to Settings > Wi-fi > Advanced > MAC address.
-
I have a Netgear DG834 router and I use MAC filtering for my WiFi.
I just attempt to connect the new device and check in the MAC filter page on my router Admin screen. This shows the new device is trying to connect. I add that to the list of approved MAC addresses and try again with the device. The fact it now works whereas originally it did not shows I must have allowed the correct MAC address - although it would be very coincidental if someone else tried to gain access at the very moment I try to connect a new device.
This has worked for me with a number of different devices. In fact, now I have to delete one of the existing devices when I need to add a new one, as my table of permitted MAC addresses is now full.
Hope that helps.